|
| |
|
|
|
Manufacturing Rage:
- Flanges: Weld Neck, Slip on, Blind, Lap Joint, Threaded, etc
- Fitting: Socket Weld, NPT
- Specials: Long Weld Necks, Nipolet Flange, Weldolet Flange, Orifice Flange,etc
- Spectacle Blinds, Spades, Spacer and Drip Rings.
- Profile Jobs as per Customer Requirements.
|
| |
| Flanges: |
| |
|
| Types & Specifications |
| |
|
| ASME/ANSI B16.5 |
Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange |
| Pressure Class |
150, 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B16.47 |
Welding Neck Flange, Blind Flange (Series A & B) |
| Pressure Class |
75, 150, 300, 400, 600, 900 |
| ASME/ANSI B 16.36 |
(Orifice Flanges) Welding Neck Flange, Slip on Flange, Threaded Flange |
| Pressure Class |
150, 300, 400, 600, 900, 1500, 2500 |
|
| |
 These Flanges are available in the following range:
Size: 1/2" NB To 80"NB and also Custom Specific.
Material Grade
| Carbon Steel |
: |
ASTM A105, A350 LF2 |
| Alloy Steel |
: |
ASTM A182 F1, F5, F9 F11, F22, F91 |
| Stainless Steel |
: |
ASTM A182 F304, F304L, F304H, F316, F316L, F316Ti, F310, F310S, F321, F321H, F317, F347, F347H, F904L. |
| Duplex Stainless Steel |
: |
UNS S31803, UNS S32750 |
| Nickel Alloys |
: |
Monel 400 & 500, Inconel 600 & 625, Incoloy 800, 825, Hastelloy C22, C276 |
| DIN |
: |
DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 |
| B.S |
: |
BS 4504, BS4504, BS1560 |
|
| |
| FITTINGS – SOCKET WELD & NPT |
| |
| TYPE: |
Elbows, Straight and Reducing Tees, Couplings, Half Couplings, Caps Plugs and Bushing, Crosses, Laterals, O’lets, Street Elbows & Inserts, |
| |
| MATERIAL GRADE |
| |
| Carbon Steel |
: |
ASTM A105, A350 LF2 |
| Alloy Steel |
: |
ASTM A182 F1, F5, F9 F11, F22, F91 |
| Stainless Steel |
: |
ASTM A182 F304, F304L, F304H, F316, F316L, F316Ti, F310, F310S, F321, F321H, F317, F347, F347H, F904L. |
| Duplex Stainless Steel |
: |
UNS S31803, UNS S32750 |
| Nickel Alloys |
: |
Monel 400 & 500, Inconel 600 & 625, Incoloy 800, 825, Hastelloy C22, C276 |
| |
: |
|
SIZE RANGE: |
: |
½” TO 4” |
PRESSURE RATING: |
: |
2000/3000/6000/9000 |
| DIMENSIONAL SPECIFICATION |
: |
AS PER ASME B16.11 |
|
|
|
|
| |
| Spectacle Blinds, Spades, Spacer and Drip Rings: |
| |
| Spectacle Blinds: |
 A spectacle blind - also known as a figure-8 blind - is generally a piece of metal that is cut to fit between two pipe flanges and usually sandwiched between two gaskets. A spectacle blind is often made from two metal discs that are attached to each other by a small section of steel. One end of the blind will have an
opening to allow flow through the pipe during operation and the other end is solid to block flow during maintenance.
|
| |
Spades & Spacers: |
| |
 Spades and Ring Spacers are basically the same as Spectacle Blinds, except that both are not attached to each other.
Spades and Spacers be applied in systems where maintenance is often not necessary, or in applications with large pipe sizes. Depending on the flange size and the Pressure Class, Spades
can weigh hundreds of pounds.
|
| |
| Bleed Rings, Drip Rings, Test Inserts |
| |
 A Bleed Ring is a ring section with one or more radial pipe connections designed to fit between standard flanges within The bolt circle, using conventional gasketing materials.
These Spectacle Blinds, Spades & Spacers are available in the following range:
| Size |
: |
1/2" NB To 60"NB and also Custom Specific. |
| Class |
: |
150#, 300#, 400#, 600#, 900#, 1500#, 2500#. |
| Dimensional Standard |
: |
API 590 & ASTM B16.48 or Customer Requirements. |
Material Grade:
| Stainless Steel |
: |
ASTM A182 F304, F304L, F304H, F316, F316L, F316Ti, F310, F310S, F321, F321H, F317, F347, F347H, F904L. |
| Duplex Stainless Steel |
: |
UNS S31803, UNS S32750 |
| Carbon Steel |
: |
ASTM A105, A350 LF2, A516 Gr. 60 / 65 / 70 |
| Alloy Steel |
: |
ASTM A182 F1, F11, F22, F5, F9 |
| Nickel Alloys |
: |
Monel 400 & 500, Inconel 600 & 625, Incoloy 800, 825, Hastelloy C22, C276 |
SPECIALS: |
| |
| Orifice Flange |
| |
 Orifice Flanges are intended for use instead of standard pipe
flanges when an orifice plate or flow nozzle must be installed. Pairs of pressure "Tappings", mostly on 2 sides, directly opposite
each other, are machined into the orifice flange.
|
| |
| Long Weld Neck Flange |
| |
 Long Weld Neck Raised Face (LWNRF) flanges are similar to a standard Welding Neck flange, but the "Neck" is considerably longer. This type is often used as a nozzle for a barrel or column.
|
| |
| Weldoflange/Nipoflange |
| |
 The Weldoflange and Nipoflange is a combination of a Welding Neck flange and a supposedly Weldolet or Nippolet.
|
| |
| Expander Flange |
| |
 Expander Flanges is a Welding Neck pipe flange where the nominal size of the non-flanged end is larger than the nominal size of the flanged end. They can be used to change the size of a pipe run
|
| |
| Reducing Flange |
| |
 Reducing Flanges are suitable for changing line size, but should not be used if abrupt transition would create undesirable turbulence, as at pump connections. a reducing flange consists of a flange with one specified diameter having a bore of a different and smaller diameter.
|
| |
Ring joint Flange |
| |
 Ring joint flange is a special type of flange connection in which a metal ring (resting in a groove in the flange) serves as a pressure seal between the two flanges.
|
| |
Plate Flange |
| |
 Plate flanges are a widely accepted and cost effective alternative to forged or cast flanges in low pressure applications.
|
| |
| Stub Ends |
| |
 A lap joints stub ends and it associated slip on flange in a piping system allows quick disconnection of the particular section involved. Stub ends are installed in pairs and mated together with two lap joint flan
|
| |
| Swivel Ring Flanges |
| |
 The Swivel-Ring Flanges permit 360° rotation of an outer ring around the hub, to allow easy alignment of bolt holes when attached to a mating standard flange for subsea applications.
|
| |
| Anchor Flanges |
| |
 Anchor Flanges are designed to restrain pipeline movements and to spread the pipeline axial forces throughout the foundation
in which the flange is anchored Anchor Flanges are designed to restrain pipeline movements and to spread the pipeline axial forces throughout the foundation in which the flange is anchored.
|
| |
| FACILITY |
| |
HME has its state of the art warehouse for the purposes of Manufacturing & Stocking Pipes and Fittings, Flanges, Valves, and other related piping accessories.
The main covered warehouse is inside Jebel Ali Free Zone and is attached to the Head Office. This warehouse is equipped with a dedicated staff and machinery to handle fittings, flanges, valves, gaskets and bolts, ranging from sizes 1/2" to 80" both in seamless and welded, for jobs as well as stock purposes. Our State of the art stocking facility is world renowned and adopts the latest safety measures to ensure the safety of our workers and material. |
| |
| LIST OF MACHINES |
| |
- CNC Vertical Lathe 3DA TVL - 3DA (Vertical Turning Lathe )
- VERTICAL MACHINING CENTER MODEL TMV 1050
- HEAVY DUTY LATHE MACHINE 8”LONG
- HEAVY DUTY SEMI NORTON BED LATHE MACHINE 6”LONG
- SUPERCUT MAKE 6 1/2' LATHE MACHINE COMPLETE
- LATHE MACHINE 8' PLANNER
- HEAVY DUTY ALL GEARED RADIAL DRILL MACHINE
- MK - 100 MARKING MACHINE WITH WORK STATION
- HYDRAULIC NUMBER MARKING MACHINE
- RIGID PIPE THREADING MACHINE
|
|
| |
|
| |
|
